-4-
1) Lay the PS-B unit on its side
and unscrew the four (4)
cover attachment screws.
2) Slide the cover horizontally in
the direction shown by the
arrow (see diagram) and lift it
off of the PS-B unit.
3) Turn the PS-B unit over and
place the PSB-CD/FD01 on
the bottom of the PS-B unit.
(See diagram)
Inside the PSB-CD/FD01,
there are four (4) cables.
These cables will be con-
nected to the PS-B unit, and
must be routed through the
Cable Opening on the side of
the PS-B. Be sure these
cables are aligned with the
Cable Opening when attach-
ing the PSB-CD/FD01 to the
PS-B.
Cover
2
Installation
Use the following steps to install the PSB-CD/FD01 in the PS-B unit.
WARNING
Shock Danger! Be sure to disconnect the PS-B unit's power
cord from its power supply prior to installing the PSB-CD/FD01.
Step 1
Step 2
PSB-CD/FD01
Cable Opening
