Pro-face Pro-face ST Series, User Manual

Page: 95 / 131

ST Series User’s Manual
6-26
6.5.6 Others Setup
Designates the ST operation performed when a 2-Way driver error occurs.
BUZZER ON ERROR
Enables/disables the buzzer sound output produced when an error related to the 2-Way driver operation
occurs.
DISPLAY WARNING
Enables/disables the warning message display used when an error related to the 2-Way driver operation
occurs.
6.5.7 Self-Diagnosis
Runs the Self Diagnosis program for the Ethernet operation. The ST must be connected to the Ethernet net-
work prior to running this program. (Only ST403 unit.)
When there is no error detected, the message “OK” will appear. If an error is detected, the message “NG” will
appear.
Be sure that this Self Diagnosis program is used only for the Ethernet operation. If you wish to run the general
Self Diagnosis program, use [Main Menu]’s [Self Diagnosis] feature.
SEE
7.2 Self-Diagnosis (Page 7-4)