Dip Switch
Description
ON
OFF
Note
1
This Dip switch
setting controls the
startup from a CF
Card.
Startup from CF
Card is enabled.
Startup from CF
Card is
disabled.
CF Card with startup
data required.
2
Reserved
3
Reserved
4
Reserved
Dip Switches
(Factory Settings)
CF Card Startup Switches
The CF Card Startup Switches are located inside the rear face CF Card Cover, just
below the CF Card insertion slot.
Termination Resistance Switch
When you need to set the GP unit's termination resistance, this dip switch is used. It is
located next to the External Output Interface Connector. Setting it to ON will insert
100
Ω
of resistance. The factory setting is OFF.
DC24V I/F Connector
Serial I/F Connector
External Output I/F Connector
Termination Resistance Switch
