When connecting the GP2000H Series units to a Serial I/F, DC24V I/F, or External
I/F, be sure to use the Digital Electronics Corporation's GP2000H Series option
cables.
9
Wiring
•
To avoid an electric shock, prior to connecting the GP's power cord
terminals to the power terminal block, confirm that the GP's power
supply is completely turned OFF, via a breaker, or similar unit.
•
The GP2000H Series units are designed to use only DC24V input.
Any other power level can damage both the GP and the power
supply.
•
Since there is no power switch on the GP unit, be sure to attach a
breaker-type switch to its power cord.
WARNINGS
Digital's option cables are as follows.
Cable Name
Model Number
RS-232C DSUB Connector 3m Cable
GP2000H-D232-3M
RS-232C DSUB Connector 10m Cable GP2000H-D232-10M
RS-232C 3m Cable
GP2000H-C232-3M
RS-232C 10m Cable
GP2000H-C232-10M
RS-422 DSUB Connector 3m Cable
GP2000H-D422-3M
RS-422 DSUB Connector 10m Cable
GP2000H-D422-10M
RS-422 3m Cable
GP2000H-C422-3M
RS-422 10m Cable
GP2000H-C422-10M
8
Emergency Switch Guard
Emergency Switch Guard
Emergency Switch Guard
This guard is used to prevent the accidental pressing of the Emergency Stop Switch
when the GP2000H unit is placed face down on a table, or is accidentally dropped.
This unit is factory equipped with two (2) Emergency Switch Guard Hole Covers
(Seals).
For guard attachment details, refer to
GP2000H Series User Manual
