46/55
4.6 Cable Diagram at the time of replacement
The connection cable for GP-477RE can be used for GP-4501T/TW. But please note
that there are precautions and restrictions as described below.
IMPORTANT
Please check the connection configurations GP-4501T/TW supports with GP-Pro
EX Device/PLC Connection Manual before using a connection cable.
(
http://www.pro-face.com/otasuke/files/manual/gpproex/new/device/index.ht
).
The Siemens MPI connection cable
,
, MPI adapter (GP070-MPI-41)
cannot be used.
Please refer to the above-mentioned GP-Pro EX Device/PLC Connection Manual
and prepare a connection cable for GP-4501T/TW newly.
When using Mitsubishi PLC A/QnA series (CPU Direct), please refer the following notes,
o
Refer > 4.6.1
When using a RS-232C connection cable
>
When using CPU I/F Cable for
Mitsubishi PLC…
o
When using GP2000-CBLA/5M-01 (* including User-created cable)
Refer > 4.6.2
When using a RS-422 connection cable
> When using Mitsubishi A/QnA series
(
CPU Direct
)
connection cable
(
GP2000-CBLA/5M-01
)
When using GP2000-CBLFX/5M-01, GP2000-CBLFX/1M-01(* including
Refer > 4.6.2
When using a RS-422 connection cable
> When using Mitsubishi FX series
(
CPU Direct
)
connection cable
(
GP2000-CBLFX/5M-01, GP2000-CBLFX/1M-01
)