13/25
3.2 Preparation
Requirements for
receiving screen data
from
GP4100
(Monochrome).
*1
GP4105/4016
GP-Pro EX
Ver. 2.6 or later
GP4107
GP-Pro EX
Ver. 2.7 or later
(Available GP-Pro EX trial version /Transfer Tool)
*2
Transfer Cable
(The following three types of cables are available)
・
An USB transfer cable (model: CA3-USBCB-01)
・
An USB data-transfer cable (model: ZC9USCBMB1)
・
A commercial USB cable (USB Type A/mini B)
* Possible to send/receive a screen data via an USB storage
or Ethernet (GP-4104 only).
Requirements for
converting screen
data of
GP4100
(Monochrome)
and
transferring the
converted data to
GP4100 (Color)
PC in which GP-Pro EX Ver.4.05 or later is installed.
Transfer Cable
(The following three types of cables are available)
・
An USB transfer cable (model: CA3-USBCB-01)
・
An USB data-transfer cable (model: ZC9USCBMB1)
・
A commercial USB cable (USB Type A/mini B)
* Possible to send/receive a screen data via an USB storage
or Ethernet (GP-4114 only).
*1:
This step is required if screen data is saved only in the GP unit, not in any other device
*2:
Please use the same version or later as or than that of the software used during creating screens on
GP4100 (Monochrome). If you don’t know the version, we recommend you to use the newest version.
For the newest version, you can download the transfer tool from Pro-face Support web.
http://www.pro-face.com/otasuke/download/freesoft/gpproex_transfer.htm
