12/25
Chapter 3 Replacement Procedure
3.1 Work Flow
Receive screen data from
GP4100 (Monochrome).
*1
Change the received data
on GP-Pro EX.
Check and modify the data
on GP-Pro EX.
Transfer the screen data to
GP4100 (Color).
Connect GP4100 (Color)
and PLC with the PLC’s
cable.
Start connection and check
the communication.
Remove GP4100
(Monochrome).
Connect the power cord.
Check the performance
and start operation.
Installation
Screen
Communication
Install GP4100 (Color)
Check the compatibility of
hardware in Chapter 2.
Check the connection
between GP4100 (Color)
and a PLC in the GP-Pro EX
Device/PLC Connection
Manual.
*1:
This step is required if screen data is saved only in the GP unit, not in any other device.
