15/34
3.2 Preparation
Requirements for
receiving screen data
from ST3000 series
*1
PC in which GP-Pro EX Transfer Tool is installed
*2
A USB data-transfer cable (model: CA3-USBCB-01)
*ST3000 series also allows you to transfer screen data with a
CF card/USB flash drive, or Ethernet.
Requirements for
converting screen
data of ST3000
series and
transferring them to
GP-4201TM
PC in which GP-Pro EX Ver.2.71 or later is installed.
A USB datda-transfer cable (model: ZC9USCBMB1) or
A commercial USB cable (USB A/mini-B)
* GP-4201TM also allows you to transfer screen data via USB
flash drive or on Ethernet.
*1:
This step is required if screen data is saved only in the display unit, not in any other device
*2:
The software version must be the same as or higher than the version that you used when creating screen
data for ST3000 series.
We recommend you upgrade to the latest version if you don’t know the version you use. Upgrade it on our
website OtasukePro! (
http://www.pro-face.com/otasuke/
