(4)
Make sure that the [Device] in the “Transfer Settings Information” is set to [USB].
If not, click the [Transfer Setting] button to open the “Transfer Setting” dialog box.
Select [USB] in the Communication Port Settings field and click [OK].
(5)
Click [Send Project] to start transfer. When the following dialog box appears, click
[Yes]. This dialog box doesn’t appear when the same project file is sent again.
(6)
The following dialog box appears during transfer and you can check the
communication status. (The display unit enters the Transferring mode and
communication with the device such as a PLC is terminated.)
Display Screen
42/59
Summary of Contents for GP-2300L
Page 14: ...GP 2300L GP 4301TW 14 59 ...
Page 16: ...GP 2301T S L GP 4301TW 16 59 ...