Chapter 5
Appendix
5.1.
Changing the setting of the external media to use
If a CF card is used for GP3000 series, after the display unit type of the project file
is changed to SP5000 series, “a CF card” is automatically replaced with “a SD
card” for the external media setting.
(1)
To use a USB flash drive instead of a SD card ->
(2)
To check
or change the SD card’s data output destination folder setting
->
[Solution]
(1)
Change the SD Card setting to the USB storage setting following the steps
below.
<Procedure>
i.
Click [Project]->[Information]->[Destination Folder].
ii.
Uncheck “Enable SD Card” and check “Enable USB Storage.
iii.
Click the [Browse] button and specify a destination folder.
