29 / 34
(5)
Click [Send Project] to start transfer.
When the following dialog box appears, click [Yes]. This dialog box
doesn’t appear when the same project file is sent again.
(6)
The following dialog box appears during transfer and you can check the
communication status. (The display unit enters the Transferring mode
and communication with the device such as a PLC is terminated.)
(7)
When transfer is completed, the status displayed in the dialog box will
change from [Transferring] to [Complete Transfer]. Click [Close] to close
the dialog box.
The display unit will be reset and a screen of the transferred project file
will be displayed.
Display Screen
