2
The floodlight has a beam angle of 120°. It can be tilted upwards and downwards at a
recommended angle of approximately 90°. The angle of adjustment will vary slightly
between models.
INSTALLATION
The floodlight is suitable for connection to a 220-240V 50Hz earthed AC supply. It is
designed for permanent connection to fixed wiring, which must be a suitable circuit
protected by an RCD with an operating current not exceeding 30mA and an MCB or
fuse of the correct rating.
Mounting the Floodlight
•
Before commencing installation, check that you have all of the tools you need.
•
Check that the floodlight is not damaged. If there is any damage, return it to the
place of purchase. Do not attempt to repair it yourself.
•
Choose your location to fix the floodlight, taking into account the guidance above.
•
Use the floodlight bracket to mark the position of the fixing holes.
•
Drill the fixing holes and fix the floodlight into position using appropriate size
screws and wall plugs (not provided). Check that it is securely fixed.
•
This floodlight is suitable for outdoor lighting applications, for domestic use only.
•
Do not use in areas where an explosive or chemical atmosphere may exist. Do not
use in areas where ventilation is restricted.
•
It is suitable for mounting on plasterboard, wood or masonry surfaces. Highly
flammable surfaces such as plastic or polystyrene must not be used.
•
Do not install on damp or conductive surfaces such as metal. It should be placed
away from any flammable materials.
•
Before drilling any fixing holes, check that there are no hidden obstructions behind
the mounting surface such as pipes or cables.
•
The recommended height for installation of the floodlight is between 0.5 and 3
metres.
•
Ensure that there is space around the floodlight to allow adequate circulation of air.
•
Orientation of the floodlight is important as shown below:
POSITIONING
120
o
90
o
Beam Angle
Angle of Adjustment
O
P
