COB LED MOTION SENSOR LIGHT
PELL0010
Please read these instructions carefully before use and retain for future reference.
•
Avoid locations of high temperature or humidity.
•
If the light output becomes less bright or flashes, replace the batteries.
•
Always remove the batteries if the light is not to be used for long periods.
•
Never mix new and old batteries or mix different battery types.
•
Separate the head from the mounting by gently pulling them apart then turn the rear
half on the head anticlockwise and remove it.
•
Remove the battery cover and insert the batteries noting the correct polarity then
replace the cover and slide the switch to either on or auto position.
•
Replace the rear half of the head unit then refit the head unit into the mounting.
IMPORTANT SAFETY INFORMATION
INSTALLATION
Switch
