Pro-Elec PEL00940 Important Safety Information Download Page 2

2

IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.

• 

Check that the voltage indicated on the rating plate corresponds with that of the local 

network before connecting the appliance to the mains power supply. 

• 

To avoid fire or shock hazard, plug the appliance directly into a suitable 220-240V AC 

electrical outlet. DO NOT use an external timer, separate remote control system, and 

extension cable or external adaptor with the appliance. Do not overload the circuit.

• 

This heater must not be located immediately below a socket-outlet.

• 

To disconnect the appliance, turn the control switch to “OFF” BEFORE removing the 

plug from main power outlet.

• 

When unplugging, be sure to pull by the plug and not the cord.

• 

Always unplug the appliance when not in use.

Note:

 the timer clock will require re-setting to the correct time if power is disconnected.

• 

Discontinue use if plug or outlet becomes hot. It is recommended that the outlet be 

checked and replaced if plug or outlet is hot to touch.

• 

Do not abuse or damage the power cord. Fully unwind the cord before use as a 

coiled cord may overheat. Do not allow the supply cord to touch hot surfaces.

• 

DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, 

or the like. Position the cord away from traffic area and where it will not cause a trip 

hazard. 

• 

Ensure that the supply cord is kept away from heat or sharp edges that could 

cause damage.

• 

DO NOT insert or allow foreign objects to enter any ventilation or exhaust vent 

opening as this may cause an electric shock or fire, or damage to the appliance.

• 

DO NOT operate the appliance with a damaged cord or plug, or after the appliance 

malfunctions, has been dropped or damaged in any manner. If the supply cord is 

damaged, DO NOT attempt to service this appliance yourself. Return it to a qualified 

service agent for mechanical adjustment, or repair.

WARNING

: In order to avoid overheating, DO NOT COVER the heater.

• 

To prevent a possible fire, DO NOT block air intakes or exhaust vents in any manner. 

DO NOT use on soft surfaces, like a bed, where openings may become blocked. 

• 

DO NOT move the appliance when it is operating. Only move the appliance when 

cool.

• 

The appliance is hot when in use. To avoid burns, DO NOT touch any hot surfaces. 

Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and 

curtains at least 3 ft (0.9 m) from the front of the heater and keep them away from the 

sides and rear. 

• 

This appliance is not intended for use by persons (INCLUDING CHILDREN) 

with reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning use of 

the appliance by a person responsible for their safety.

• 

Children should be supervised to ensure that they do not play with the appliance.

• 

Do not use this heater in the immediate surroundings of a bath or a shower. 

• 

This appliance is not intended for use in bathrooms, laundry areas and similar indoor 

location where this it may come in contact with water.  

• 

Do not immerse any part of this appliance or supply cord in water.

• 

DO NOT use in areas where gasoline, paint, or flammable liquids are used or stored.

• 

This appliance is designed for indoors ONLY.

Reviews: