7
•
Remove the air filters on the rear of the unit.
•
Run a vacuum cleaner lightly over the surface of the filters to remove dust.
•
If the filters are exceptionally dirty wash them in warm water and a mild detergent
and allow to dry thoroughly before refitting.
•
Note: Do not operate the air conditioner without the filters.
Seasonal Cleaning
If the air conditioner is not going to be used for a long time, please follow the steps
below:
•
Unplug the air conditioner from the mains.
•
Remove the drainage plug and empty the internal water tank.
•
Plug the air conditioner into the mains and power on. Select the fan mode and run
for two hours to allow the air conditioner to dry out.
•
Turn off and unplug from the mains.
•
Clean and dry the filters and then reinstall them.
•
Remove the batteries from the remote control.
•
Put the air conditioner back in its original carton and store in a cool, dry place.
TROUBLESHOOTING
Trouble
Cause
Solution
Machine
does not
work
• Power off
.
• Water-full indicator is on
.
• Timer function is active
.
• Switch the power on
.
• Drain internal water tank
.
• Deactivate the timer function
.
Machine
auto-restarts
frequently
• The unit is in direct sunlight
.
• Door and windows are open,
other heat sources are in the
room
.
• Filters are too dirty
.
• Air-inlet or outlet is blocked
.
• Reposition the unit
.
• Close the door and windows
and remove other heat
sources
.
•
Clean or replace filters
.
• Remove blockage
.
Too noisy
• Machine is not on a level surface
.
•
Place it on a level floor
.
Compressor
doesn’t work
• Compressor time-delay
protection is on
.
• Wait for 3 minutes, then restart
the air conditioner
.
The remote
control does
not work
• Distance too great
.
• Remote control signal not
detected by the control panel
.
• The batteries are drained
.
• Make sure that the remote
control is correctly aimed at
the control panel
.
• Replace the batteries.
