6
Dehumidifying Mode
•
Press
MODE
to select dehumidifying mode, dehumidifying mode indicator turns
on.
•
In the dehumidifying mode, the sleep function cannot be set
up, and the fan
speed
is low.
Sleep Mode
•
Press
SLEEP
to enter into sleep mode, the default value of the fan speed is low.
•
When the sleep mode turns on, in the cooling mode, after the first hour the
temperature setting will go up 1°C. After the second hour the temperature setting
will go up a further 1°C, and then remain the same.
Note: Sleep mode is not available in dehumidifying and fan mode.
Compressor Protection
•
After power on or a restart, there is a three minute delay before the compressor
starts to operate. This helps to prolong the life of the compressor.
WATER DRAINAGE
•
The air conditioner has an internal water tank to collect water that accumulates
during the cooling process. This tank will need to be emptied periodically.
•
When the internal water tank is full, the symbol “ ” will flash on the screen, and
a buzzer will sound. The air conditioner will go into standby mode, the compressor
will stop and all the key functions will be disabled. The water tank will need to be
emptied before normal operation can be resumed.
•
Unplug the air conditioner from the mains supply.
•
Under the drainage plug on the rear of the unit place a shallow container to collect
the water. Use this only for temporary drainage of the unit. Do not allow the water
to drip continuously into the container, as it will overflow.
•
Remove the plug cap and the drainage plug to empty the tank.
•
When the tank is empty, refit the drainage plug and cap.
•
Reconnect the air conditioner to the mains supply and press the
POWER
button
on either the front panel or the remote control. The air conditioner will restart and
operate normally.
MAINTENANCE
Important: In order to avoid an electric shock, power-off the air conditioner and
disconnect the mains plug before performing any maintenance or repair activities.
Cleaning
•
Unplug from the mains supply before cleaning.
•
Do not splash water into the air conditioner.
•
Clean the outside of the air conditioner with a damp, not wet, cloth and dry
thoroughly before using.
•
Do not use any chemicals, abrasives or solvents, which may damage the surface
of the air conditioner.
Filters
Clean the filters every two weeks. If the filters become blocked by dust, the efficiency
of the air conditioner will be reduced.