9
EN
12. Pass the rigging line of the jib sail
through the eye plate on the mast and
then thread the line into the jib stay.
Thread the line through the swivel and tie
an overhand knot to the jib stay to secure.
Connect “I” to “I” as shown in the picture.
13. Thread the rigging lines of the top of
the jib sail through the eye plate on the
mast, round it on the cleat and secure
it by tying a knot. Connect “K” to “K” as
shown in the picture.
14. Pass the rigging line of the main sail
through the hole of the masthead crane,
thread the line through a jib stay and at
last thread the line through the swivel,
ending with tying a knot. Connect “J” to
“J” as shown in the picture.
15. The finished installation of the rigging
lines of the main sail.
