manualshive.com logo in svg

PRO AIR TPK 21 LT, Functional Description And Operating Instructions

Share
Download
PRO AIR TPK 21 LT Functional Description And Operating Instructions Download Page 99

 

11.1.2 Setting Pre-Alarm 

   

93

Once the desired measuring channel has been set, the desired value for the 

„Pre Alarm" 

can 

be set. 

8.     If the 

„Pre Alarm“

 field is not already highlighted, select the field and  

       confirm with      .     

This brings you to the following menu:

This menu item can be confirmed with 

„Yes“

 or 

„No“

 by selecting the field in the 

following screen.

8

9

Source

Pre Alarm

Main Alarm

On Delay

Yes

No

Auto-Off

Upper Limit

Lower Limit

 

11.1.2 Setting Pre-Alarm 

   

87

Once the desired measuring channel has been set, the desired value for the 

„Pre Alarm" 

can 

be set. 

8.     If the 

„Pre Alarm“

 field is not already highlighted, select the field and  

       confirm with      .     

This brings you to the following menu:

Description:

Meaning:

Auto-Off

Defines whether Pre-alarm 1 must be acknowledged or automatically turns itself 
off in the event of a limit violation.

Upper Limit

This menu item allows you to configure the upper limit value for Pre-alarm 1.

Lower Limit

This menu item allows you to configure the lower limit value for Pre-alarm 1.

This menu item can be confirmed with 

„Yes“

 or 

„No“

 by selecting the field in the 

following screen.

8

9

Source

Pre Alarm

Main Alarm

On Delay

Yes

No

Auto-Off

Upper Limit

Lower Limit

Summary of Contents for TPK 21 LT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands