CONNECTING AND OPERATING
1. Connect one HDMI Cable between the HDMI output port of source device and the
HDMI input port of Transmitter unit (5 metres Max)
2. Connect one HDMI Cable between the HDMI input port of display device and the HDMI
output port of Receiver unit. (5 metres Max)
3. Connect one 100 Ohm Cat.5e/Cat.6 cable between the RJ45 port of Transmitter unit
and RJ45 port of Receiver unit.
Note: Cat.5e/Cat6 is to be no longer than 60 metres in length.
4. Connect 5V DC power supplies to both Transmitter and Receiver unit.
5. Power on the display device and then the source device.
BI-DIRECTIONAL IR
With Bi-directional IR, you can control the source device at the receiver end. Conversely,
you can control the display/receiver devices from the transmitter end of the system.
So which ports do what? The IR Receiver port is where you plug-in your IR Target—the
picked up signal will be sent to the
other
unit’s IR Blaster port where your IR Emitters will be
connected.
