Troubleshooting
Trouble
Where to inspect
How to correct
The display does not
light up.
Is the power plug plugged
into a socket?
Plug the device into the
socket correctly.
Is the main switch in
position "1"?
Turn on the power switch
(position "1").
Have the switch fuses
blown?
Replace the fuses.
Product does not
produce aerosol.
Is there salt in the salt
tank?
Pour salt in the salt tank.
Is the dispenser power
plug connected?
Connect the dispenser
power plug.
Is the dispenser clean?
Clean the dispenser.
Is the fan power plug
connected?
Connect the fan power plug.
Is the grinder power plug
connected?
Connect the grinder power
plug.
Is the grinder clean?
Clean the grinder.
Is the halogenerator door
open or unlocked?
Close the halogenerator
door or lock them.
The display shows
alarm "Grinder is
blocked"
Inspect salt silts around
and beneath rotating part
of the grinder.
Use a small brush to
carefully remove salt from
the grinder and salt deposits
collected beneath the
grinder.
The display shows
alarm "Dispenser is
blocked"
Is the dispenser clean?
Use a small brush to
carefully remove salt from
the dispenser.
The display shows
alarm "Dispenser fuse
is blown"
Has the dispenser fuse
blown?
Replace the fuse.
The display shows
alarm "Grinder fuse is
blown"
Has the grinder fuse
blown?
Replace the fuse.
If the unit does not operate normally after the above-mentioned measures, do not
touch the internal mechanism and consult the store where you purchased the
device or the nearest PRIZMA dealer.
Troubleshooting
