Directional Controls:
Handle bars are moved to pivot the unit and steer the in the desired direction.
Spreader On/Off Control:
Located in the LH. side of the control panel. Push lever to open spreader, pull back to
close.
Spreader-Rate Control:
Located on the upper portion of the back of the spreader hopper. See rate setting section.
Spread Pattern Control:
Located on the front of the hopper above the impeller. See pattern control section.
Drive Wheel Release:
Located on the L.H. side of the machine near the front L.H. wheel. Release is used to release
drive system to allow machine to be pushed without engine running. Pull rod out and hook latch to allow machine to be
pushed without engine running.
Parking Brake Engagement:
Located on the back of main frame. Push rod in and hook latch to engage parking
brake.
8.
Broadcast
Spreader
Rate Control
Parking Brake-
Push in & Lock
to Engage
Drive Wheel
Release -Pull Out &
Lock to Engage
Spread Pattern
Control
Forward Ground
Speed Control
Directional
Control
Throttle/Choke
Control
Spreader On/
Off Control
Directional
Control
Reverse Ground
Speed Control
Summary of Contents for PS 200 II
Page 16: ...16 14 Notes Printed 1 13...
