FS Cradle – Installation manual – 1.2
15
Maintenance and repair
It is important to keep the springs (where the FS Readers make electrical contact to the FS Cradle
for charging the battery) are kept free from pollution. For this reason, the contacts of the FS
Cradle should be cleaned at regular intervals; the schedule depends on the degree of pollution.
If the fuse of the FS Cradle is broken, it should be replaced.
CAUTION: For continued protection against risk of fire, replace only with same type
and rating of fuse.
•
Take out the power cord from the power socket and from the FS Cradle.
•
Take out the fuse holder (C) from the power inlet connector (A).
•
Replace the broken fuse (B).
•
Put the fuse holder with new fuse in the power inlet connector.
•
Connect the power cord to the FS Cradle and power socket.
If the FS Cradle is in need of repair, the customer will contact Priva B.V. after which the product
can be sent back to Priva B.V. for repair or possible replacement.
