Priva B.V.
14
FS Cradle – Installation manual – 1.2
Taking out of operation
In order for the FS Cradle to be taken out of operation, the following steps need to be
undertaken:
1.
The installer disconnects the power cord.
2.
In case the FS Cradle is mounted to the wall, it should be lifted from the mounting
screws.
3.
The FS Cradle is now ready to be shipped for repair.
Troubleshooting
This chapter provides solutions for the most frequent problems with the
equipment. If you have a problem that cannot be resolved using the information in
this chapter, please contact Priva.
Troubleshooting - general
Certain activities may only be performed by authorised installers/service engineers
because they require specialist knowledge and skills.
Problem
Possible
cause
Solution(s)
Led off
Power cord disconnected
Reconnect power cord
Led off
Fuse is broken
Replace the fuse in the power inlet connector
(see section Maintenace and repair)
