PRITY 2CF, Technical Description And Operation Instructions

Page: 19 / 24

- 19 -
At proper connection, servicing and maintenance the firebox doesn't give off
smoking emissions in the premises. If nevertheless this occurs, the premises are aired
and the cause of the filling with smoke must be found out and removed.
Don't burn: garbage, stuck or painted softwood, plywood or boards of wooden
parts, wooden sleepers or other wastes containing artificial chemical admixtures, since
poisons don't burn, but only change their composition and when they are thrown away
in the atmosphere, they lead to unpredictable consequences.
Cleaning, maintaining and preservation
On purchase the firebox shall be kept from mechanical damages.
During operation the door of the firebox must be closed. When opening of the door
to refuel, the openings for the primary air are closed and one shall be careful not to
drop down fuel and prevent it from falling out of the firebox.
The power of the firebox is regulated with the help of the valves for the primary air
and on the outlet for the flue gases.
Don't touch the firebox with your bare hands, while it is hot.
The ash - pan shall be cleaned daily. Don't throw the ash in plastic vessels.
Clean regularly the passage sections off the flue gases in the firebox and the pipes.
The painted surfaces are cleaned with a damp cloth. Don't use cleaning detergents. If
you want to freshen the paint, use a suitable phial of sprayer.
The glass pane is wiped with a damp towel, and when necessary it can be washed
with cleaning detergents or water after removing from the door.
To prevent the condensation and a possible corrosion, when the firebox is not
operated for a long time (for example during the non - heating period), it must be
cleaned from the ash and remainders of fuel, and the adjusting elements – open, for a
better circulation around and through the firebox.
During repair works turn the power supply off.
Repair works on the electrical part must be performed only by qualified electrician.
Do not perform any unauthorized modifications in the design!
During repairs only original spare parts by the producers shall be used.
It is recommended the installation to be done by a qualified technician.