Lightweight ATA Approved Rack Case
The 19” LCD touch screen, two SDJ computers, and rear-mounted power
strip are all protected within the high strength, lightweight,
polyethylene ATA rack case. The ATA approval certifies the case is
approved for shipping on an airline. However, if you do send your SDJ
system flying, we still recommend putting the case and speakers in the
original shipping boxes for added security, and to keep them looking new.
The rack case measures approx. 22” x 21” by 15”, weighs 22 lbs empty,
and about 40 lbs full. It features an 8-space slant top, 2 rack spaces in
the front, and 10-spaces in the rear. The slant top fits the LCD monitor
perfectly. The two front spaces house the two SDJ computers. The
power strip has a master on/off switch and is mounted to the rear set of
rack rails. The rear cover has a hole in it big enough for power and
microphone cables so you can keep it installed during an event. While
you can normally keep the rear cover installed for a clean look, and to
protect the equipment, if it is an extremely hot day, or just for added
insurance, you may want to run your SDJ system without the rear cover
installed.
Amplified Speakers With Built-In Mixers
While you can use SDJ with any speakers, we prefer amplified with built-
in mixers for simplicity, and the fast setup. Turn-key SDJ systems include
2-way Behringer 15” DSP (74 lbs/600 watts each) or NEO (48 lbs/1200
27