background image

7

Prisma Daps 2000 has an

electrical design to meet all

requirements for constant

power supply.

CONSTANT POWER SUPPLY*

CONTROL I/O

LAMP I/O

18-24V AC/DC

10–50V AC/DC

10–50V AC/DC

28–49V AC/DC

17–50V AC/DC

17–50V AC/DC

100–240V AC

50–170V AC

50–170V AC

100–240V AC

120–250V AC

120–250V AC

Protection Class

Class II, double insolated

IK Rating

IK10, models without vibrator • IK08, models with vibrator

IP Classification

IP55

Power Consumption 

Walk: 2,5-10W • Tram: 7,5-10,5W

Locator sound frequency

880 Hz

Min & Max volume

0 dBC, 30-87 dBC
With connecting external loudspeaker: 100 dBC

Light Character

Yellow, approx. 590nm wavelength

Light Output

LED in front: 9 x 4000 Partial FLUX
LED light ring: 32 x 4000 Partial FLUX

Temperature Range

-40° F to 158° F 
-40°C to +70°C

Humidity

0-100% RH

Cabling

Prisma Daps 2000•L: Standard 13-wire cabling.
Prisma Daps 2000•M: Standard 6 or 8-wire cabling.
Adapter cabling is used when exchange of the electronic module from Prisma Daps TS-900 series, 
Prisma Daps 1000 to Prisma Daps 2000. Customized cabling on request. 

Colour

Blue anodization • Gold anodization • Yellow varnished • Gray varnished • Black-vanished
Other colours on request

Anti-graffiti

Possible to add on all colours

Housing
Push Front

Aluminum 
No moving parts

Lids
Arrows

Polyamide PA66

Dimensions

Diameter to fit the pole

114 mm, 4.5 Inch

Weight

≈ 2,5 kg

Force to push the front

1 ton 0.22 lbs

Push front mechanical life

≈ 10 million presses

Warranty

5 year

TECHNICAL INFORMATION

PROGRAMMING

Prisma Daps 2000 is programmed from the Android App: Prisma Daps.

Choose your unit - Set your functions - Transfer settings and files.

Prisma Daps 2000•L is equipped with a NFC antenna in the top cover for wireless 

communication, without opening the Prisma Daps unit.

You can transfer via the USB-port, which is placed behind the LED in front, 

on both Prisma Daps 2000•L and Prisma Daps 2000•M.

READ FULL INFORMATION ON PROGRAMMING IN THE APP MANUAL

Manual for Prisma Daps Android Application is found at www.prismatibro.se/en/ladda-daps/

*Separate direct constant supply - not via the lamp cable

1

Prisma Support

DIGITAL ACOUSTIC 

PEDESTRIAN SIGNAL

ANDROID-APP

MANUAL

VERSION 2.7

2000

125 mm

112 mm

284 mm

125 mm

274 mm

112 mm

Summary of Contents for Prisma Daps 2000









Reviews: