Assembly Instructions
STEP 1
Attach the two
Wall Plate
s and four
Wall Plate side
s to wall exactly as presented in
Fig 1a.
There are five
holes in
Wall Plate
and three holes in
Wall Plate side,
which can be used for screw connections to wall. Make
sure the plates are oriented correctly and the distances are as informed, depending on the screen size. After
this attach the
wall Socket
s to the screw threads marked with
x).
Tighten the sockets securely and make sure
the heels of sockets come in contact with the plates. (
Fig 1b
and
Fig 1c)
.
NOTE:
Please consult the professional installer if you do NOT know an appropriate way to attach heavy loads to
your wall material.
Assembly Instructions:
STEP 2
By using the
L-Wrench, 3mm,
screw the
Set Screw m6 x 30
inside the each
Fabric holder
so that the bottom of
the screw will be in the same level as the bottom of the holder
(Fig 2a).
Now prepare to attach the
Wall Mount
s
onto the two
Extension Bracket
s,
and the
Wall Mount Side
s,
one onto the each four
Corner Bracket
s
(Fig 2b
and
Fig 2c)
. By using
L-Wrench 4 mm,
tighten every
Cap Screw m6 x 16
securely. Attach also the wooden
Corner Block
to each four
Corner Bracket
exactly as shown in a
Fig 2d.
At this point the
Fabric Holder
(Fig 2e)
is temporarily inserted inside the
Corner Block
to ensure it fitting there also after tightening the
Torx Screw
s
, 5
x 30.
Fig 2
a)
Video Screen
Cinoscreen F-100 / F-AT100
116”: 1238 mm
136”: 1438 mm
156”: 1638 mm
Fig 1a
x)
x)
x)
116”: 1001 mm
136”: 1235 mm
156”: 1475 mm
Fig 1c
Fig 1b
Fig 2
b)
g)
Fig 2
c)
d)
e)
f)
Fig 2
h)
... Screw also two
set screw
s,
m4 x 30
to each
Corner Bracket
and
Extension Bracket
, exactly as presented in
Fig 2f
and
2g,
so that the screw head does not exceed the bottom
surface of the bracket.
As shown in
Fig 2h,
attach the six
Frame Holder
s to six
Frame
Holder Plate
s with
Cap Screw m4 x 35.
Tighten the
each screw securely by using
L-Wrench, 3 mm.
NOTE!
Ignore the steps shown in
f) , g)
and
h)
when assemble
together with the
Cinomask
masking system.
