Basic Installation
Before installing this product please make sure that you have read all warnings and
safety information provided in this manual.
Caution:
The product must be placed/mounted on a rack, shelf, or other suitable
surface that is rated to support the weight of the product.
The product must also be placed such that the safety cable can be attached. The safety
cable must be attached in such a way that it can not be removed without releasing the
clip.
The safety cable should be attached at all times during both installation and removal of
the product. Attaching the safety cable should be the first step before installing the
product and the last step after removing the product.
Mounting the product
Step 1:
Install a c-clamp or other appropriate rated pipe coupling device to the steel
yoke of the RevEAL Studio Instrument.
Step 2:
Loop the safety cable through your support, such that after clipping the
carabiner the loop cannot slip off of your support.
Step 3:
After ensuring that the loop cannot slip off of the support, clip the carabiner to
the safety cable.
Step 4:
Position the mouth of the c-clamp over your intended mounting surface. Once
you are happy with the location, tighten the clamp until the product is secured to the
surface.
Caution:
The product should never be installed without the proper use of the safety
cable.
Prism Projection Inc. - RevEAL Studio Operating Manual
7