3.0 Assembly Instructions
3.4 Electrical connections
Connect all the cables to the control box
as shown in the pictures opposite.
a.
Connect the up/down actuator cable
connector to the second circle (marked No.
1) from the left side of the control box (as
shown in Fig. 6).
b.
Connect the leg spreading actuator
cable connector to the third circle (marked
No. 2 in Fig. 6) from the left side of the
control box (as shown in Fig. 7).
c.
Connect the handset connector to the
large circle on the left side of the control
box. A lug on the plug ensures correct
orientation of the hand control connector
(as shown in Fig. 8).
d.
Connect the mains cable/power cord to
the control box (as shown in Fig. 9).
9
Confirm all cables are located and
secure before operating the hoist
as shown in (Fig. 10).
WARNING
Fig. 6
1
Fig. 7
Fig. 8
Fig. 9
Fig. 10
2
