3.0 Assembly Instructions
3.3 Hoist assembly
8
Do not use a sharp knife/edge to open the packaging.
a.
Carefully open the box and remove all loose parts and excess
packaging from the carton.
b.
Carefully lift the hoist components out of the carton.
WARNING
2-person lift recommended.
c.
Place the hoist base on a flat surface and
ensure the rear braked castors are locked.
d.
Remove the black mast locking hand
wheel from the top of the base (as shown
in Fig. 2).
e.
Ensure all cables are routed correctly
and are clear of the base and mast when
lifting into position (as shown in Fig. 3).
WARNING
WARNING
Please ensure both hands are on the
handles when lifting the mast into
position, possible risk of finger trap.
f.
When the mast if fully engaged with the
base, fit and fully tighten the mast locking
hand wheel (as shown in Fig. 4 and 5).
Ensure the mast is fully seated into the
base and the mast locking wheel is in
position and tight before using the hoist.
WARNING
Fig. 2
Fig. 3
Fig. 4
Fig. 5
