© Prior Scientific Instruments Ltd., UK
Version 2.1 Nov 2014
Page
Position the Dispensing Tip over the slide approximately 15mm above the
microscope slide. Make sure it sits centrally above the microscope slide to avoid oil
dripping over the edge of the sides.
Once position of Dispensing Tip is achieved tighten all Locking screws. The Oil
Dispenser is now ready to use.
3.5 Installation of COM Port
The RSR232 port is ready to use, with standard PRIOR settings:
To install the USB port download the appropriate driver from the software
download section of the website. PL220 is identified on the download page.
http://www.prioruk.com/downloadcentre/dc_software.html
The software should automatically install.
Plug in the USB cable to the PL220 and computer, power on the PL220.
The COM PORT should automatically be installed and the PL220 should be
controllable via the computer.
