Prio Prio Jet X845 User Manual Download Page 3

3

Description
Congratulations on your purchase of the Prio® Jet booster pump box! Please familiarize 
yourself with the general concept behind the product and main modes of operation.

Booster pump box models X845 and X855 were designed for 50-500 GPD rated Reverse 
Osmosis water filtration systems for use in areas with low water pressure, or for users that 
want  maximum  performance  and  the  best  quality  filtered  water  from  their  R.O.  systems. 
Both models include the microcontroller and LED indicators for the hassle-free, fully 
automatic operation and easy reading. They may be purchased separately to upgrade existing 
compatible systems or be included in the high-end R.O. water filtration sets.

Model X845 is designed for 50-100 GPD rated R.O. units usually equipped with the water 
collection container such as water pressure tank. Model X855 is designed for 150-500 GPD 
rated R.O. machines, both direct flow (“tankless”) or with water tank.

Key Features:

Automatic  flush  valve:  for  peak  performance  and  healthier  membrane.  18  seconds  of 
powerful flush at the end of each water filtration cycle prevent the scale and debris build-
up on the membrane outer surface.

Powerful booster pump increases pressure to radically improve the performance 
and  effectiveness  of  the  R.O.  unit  in  all  three  key  areas:  increases  filtered  water  flow 
(production rate), increases rejection rate (improves water purification quality), increases 
recovery rate (decreases amount of waste water).

Prolongs the membrane and pre-filter(s) service life due to increased recovery rate.

Fully automatic operation, no service necessary: plug and forget.

LED indicators: easily understand what the state of your R.O. unit is. Ever wondered 
whether your tank is full or empty? No more guess!

Split, flexible installation possible where needed: install the pump box up to 50 feet away 
from the R.O. unit itself. Useful for the situations like lack of space or lack of electrical 
outlet under the sink, or moving the unit to more appropriate place.

Idling protection: if you forget to close the filtered water faucet for a long time the pump 
will shut down automatically for you.

Full separation of electrical components from the membrane and filters of the main R.O. 
unit makes the regular servicing of your R.O. machine both easy and safe: no need to 
worry about electrical valves and wires while changing your water filters or membrane.

Quick fittings for easy tube connections.

Summary of Contents for Prio Jet X845

















Reviews: