15
Regular Use
After the installation use your R.O. unit as you normally would.
If your tank is not full the unit will turn on automatically and fill it up with filtered water. Then
it will flush the membrane and shut off automatically. If you open the faucet and take some
filtered water from the tank the pump will turn on automatically to refill the tank again.
For direct flow systems, just open the filtered water faucet. The pump will turn on
automatically and will produce the filtered water flow in real time until you close the faucet.
At the end of each water production cycle the membrane will be flushed, and then the system
will shut off automatically.
Please note that R.O. membranes (especially dry ones) need up to 50 hours of active operation
before they reach peak performance in terms of water flow, recovery and rejection rates.
For your safety and peace of mind please unplug the unit from the electrical outlet and close
the inlet valve before servicing your R.O. system such as changing the filters or membrane,
or during vacations.
