Printronix

P9212, Setup Manual

Page: 88 / 206

Configuring the Printer 3–46
VFU (Vertical Format Unit) Table
The VFU Table feature controls how the printer handles the VFU formatting
information, which is stored in RAM. Either the VFU information can be
cleared or it can be saved to NVRAM.
•
Clear: With “Clear” displayed, press ENTER to discard the loaded VFU
data.
•
Save: With “Save” displayed, press ENTER to save the current VFU
data in NVRAM. This data will be loaded into the VFU when the printer
is reset or turned on.
NOTE: The VFU Table feature is available only when the P-Series Printer
Protocol or P-Series XQ Printer Protocol has been selected.
Perforation Skip
The Perforation Skip feature allows or prevents printing on page
perforations. When enabled, it sets up a total skip-over margin of 1/2”, 2/3”,
5/6”, or 1”. For example, a skip-over margin of 1” allows a 1/2” margin
above the page perforation, and a 1/2” margin below the page perforation.
When this feature is disabled, the printer will not automatically skip over
vertical page margins; in this case, printing can occur on page perforations.
Paper Out
The Paper Out feature determines whether an out-of-paper condition should
be processed immediately or delayed for 2 vertical inches, allowing printing
to continue to the end of the page.
•
End of Paper: The printer delays processing of an out-of-paper
condition by 2 vertical inches; printing can continue to the end of the
page.
•
Immediate: The printer processes an out-of-paper condition
immediately.