Printronix

P9212, Setup Manual

Page: 58 / 206

Configuring the Printer 3–16
Step Notes Result Press
11.
OR
Line Spacing
Set at X LPI *
Cycle through the values
(6, 8, or 10.3 LPI).
12.
ENTER
Line Spacing
Set at 8 LPI *
Selects the displayed value.
Asterisk (*) appears,
indicating this value is
active.
13.
Continue this pattern to make other changes.
14.
All changes remain in memory until you turn the printer off. If you want to save these changes as a
configuration that is stored in memory and can later be loaded, go to page 3–18. If you want to
use—but not save—these settings, continue with the following steps.
15.
CLEAR
Off–Line
Ready
1
16.
+
ENTER Switch
Locked
Prevents settings from
being changed.
17.
Close the printer cover.
18.
ON LINE
On–Line
(Current Font)
1
Places the printer on-line,
ready for normal operation.