Printronix Network Interface Card, User Manual

Page: 236 / 378

Chapter 10
Configuring The AS/400 For Printing
236
Destination Type (DESTTYP)
Specify
*OTHER
for the DESTTYP parameter.
Transform (TRANSFORM)
Specify
*YES
.
Manufacturer Type and Model (MFRTYPMDL)
Select a manufacturer type and model. This is the name of the
WSCO. Select
*IBM6400EP
for Epson emulation or
*IBM6400
or
*IBM42023
for Proprinter Emulation if you have AS/400 V3R2 and
above or V3R7 and above.
Internet Address (INTNETADR)
The IP address of the NIC.
NOTE: You may specify either *INTNETADR (and the NIC IP
address) or the hostname for the NIC (if you added the
printer to the host table entry as directed in “Configuring A
TCP/IP Host Table Entry” on page 233).
To Create An Automatic Remote Output Queue
1. From the AS/400 command line, enter
CRTOUTQ
.
2. Figure 29 displays in bold the parameters you need to specify.
Send TCP/IP Spooled File (LPR)
Type choices, press Enter.
Output queue OUTQ > USERNAME
Library *CURLIB
Maximum spooled file size: MAXPAGES
Number of pages *NONE
Staring time