Printek FormsPro 4300, Operation Manual

Page: 3 / 105

Page iii
TABLE OF CONTENTS
INTRODUCTION 1- 1
HOW TO USE THIS MANUAL 1- 1
CHAPTER 2 - INSTALLATION AND QUICK SETUP 2- 1
SELECTING AN APPROPRIATE INSTALLATION LOCATION 2- 1
INSTALLING THE RIBBON 2- 3
INSTALLING PAPER 2- 5
TESTING THE PRINTER 2- 8
CONNECTING THE PRINTER TO A COMPUTER 2- 8
Entering the Interface Menu at the Control Panel 2- 9
MATCHING THE PRINTER TO YOUR APPLICATION SOFTWARE 2-11
CHAPTER 3 - OPERATION 3- 1
INTRODUCTION 3- 1
CONTROL PANEL DISPLAY AND INDICATORS 3- 1
CONTROL PANEL BUTTONS 3- 3
INTRODUCTION TO SETUP 3- 6
Entering the Forms Setup Menu 3- 6
Entering the Interface Setup Menu 3-10
CHANGING THE PAPER 3-13
CHANGING THE RIBBON 3-16
Using Printek Ribbons 3-16
Removing the Old Ribbon 3-16
Installing the New Ribbon 3-17
CHAPTER 4 - USING SPECIAL FEATURES 4- 1
UNLOADING AND SELECTING FORMS 4- 1
HANDLING A PAPER ERROR CONDITION 4- 2
Standard Paper Error Handling 4- 2
Page Reprint 4- 2
USING THE RIBBON CHECK FEATURE 4- 4
Matching the Ribbon Wear Indicator to Printer Use 4- 4
Turning Off Ribbon Checking 4- 4
CHECKING SETUP CONFIGURATION 4- 4
PRINTING SETUP INFORMATION 4- 5
PARKING THE FORMSPRO 4503 TRACTORS FOR SHIPMENT 4- 5
CHAPTER 5 - IN CASE OF DIFFICULTY 5- 1
INTRODUCTION 5- 1
SYMPTOMS AND POSSIBLE CAUSES 5- 1
USING THE HEX DUMP MODE 5- 4
SELECTING A QUALITY FORM 5- 5
REPLACING THE AC POWER FUSE 5- 5
APPENDIX A - ADVANCED CONTROL PANEL FEATURES A- 1
SETUP: OPTIONS A- 1
SETUP: SECURITY A- 4