Princess 332938, Manual

Page: 10 / 60

10
EN
To remove the crevice nozzle, pull the •
crevice nozzle (14) from the hose (6) or the
extension tube (8).
Use
Unwinding and rewinding the
mains cable (fig. A)
The mains cable rewind button (2) can be
operated by hand or foot.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not unwind or rewind the mains cable
while the appliance is switched on.
- Always hold the mains plug to unwind the
mains cable. Never pull the mains cable.
Before use, hold the mains plug and unwind •
a sufficient length of the mains cable from
the back of the appliance.
After use, press the mains cable rewind
•
button (2) to rewind the mains cable back
into the appliance. Manually guide the
mains cable to make sure that it does not
swing back. Make sure that the mains plug
is correctly located.
Adjusting the length of the tube
(fig. A)
Keep the locking knob (16) pressed and •
slide the extension tube (8) to the required
position.
Release the locking knob (16).
•
Adjusting the suction nozzle (fig. A)
The floor surface selector can be set to adjust
the suction nozzle to the required floor surface.
The floor surface selector can be operated by
hand or foot.
For vacuuming on laminates, tiles, etc., press •
the corresponding part (A) of the floor
surface selector (11).
For vacuuming on carpets, press the
•
corresponding part (B) of the floor surface
selector (11).
Switching on and off (fig. A)
The on/off button can be operated by hand
or foot.
To switch on the appliance, press the •
on/off button (1).
To switch off the appliance, press the
•
on/off button (1) again.
Adjusting the airflow (fig. A)
The airflow can be adjusted using the airflow
control switch.
To adjust the airflow, set the airflow •
control switch (9) to the required position.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids for cleaning.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible •
damage.
Regularly clean the ventilation slots using
•
a soft brush.
Store the appliance in a dry place, out of
•
the reach of children.
Emptying the dust compartment
(fig. A & B)
Keep the release button (4) pressed and •
pull the dust compartment (3) from the
appliance.
Press the release button (17) and open the
•
cover (18).
Carefully tap the dust compartment (3)
•
with your hand to remove the dust.
Close the cover (18) until the release
•
button (17) clicks into place.
Insert the dust compartment (3) into the
•
appliance until the release button (4) clicks
into place.