Instruction manual
6
Docking station installation
•
Do not install on weak structures such as plaster walls and
compressed wood boards when their thickness is less than
10mm.
•
To prevent fire or electric shock due to leakage, please do not
install it on metal walls.
•
Hanging area must be flat.
•
Wall holder must be placed in ambient temperature between 5°C
and 40°C.
•
Ensure the screws will not damage any gas pipes, water pipes or
wires insides of the walls.
•
No part of the appliance should touch the ground when placed on
the docking station.
•
When installing the docking station, 4mm x 30mm screw is
suggested to be used on wooden surface.
•
The 6mm x 32mm Wall plug and 4mm x 30mm screw should be
used on cement surface.
Charge
•
Put the main body on a horizontal table.
•
Connect the power cord to the power outlet and the charging port
in the handle section of the main body to start charging. The
power indicator flashes blue.
•
Charging time: 2.5-3.5 hours; discharging time: 15-25 minutes
•
The adapter may become warm during charging, this is normal.
