Princess auto EHS350A, Operation And Parts Manual

Page: 29 / 59

. Hold the front handle with left hand and firmly press the cut-off saw against ground ,
place the right foot on the carburetor box cover.
. Holding the starter grip (5) securely, slowly pull out the starter rope for a short
distance, and then pull it through quickly and strongly.
Note: a. Starter rope is 1.15m long, do not pull the rope out more than it’s length
otherwise it may break or cause damage to the starting system.
b. Do not let go of the starter grip.
c. After pulling, guide the rope back into place slowly.
d. Pull the rope only straight up and down through the rope guide bushing to
prevent it from wearing.
. After the rope has been pulled through:
a. If the engine does not start, press the button of the decompression valve again
and restart the engine.
b. If the engine runs for a while but doesn’t keep running, press the decompression
valve in, move the choke lever to and then restart the engine.
28