8
For technical questions call: 1-800-665-8685
V 3.04
8548752
Infrared Low Profile Cabinet Heater
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. and turn on
the power switch in the rear of the unit. Only operate heater in upright position with caster
wheels attached.
OPERATING INSTRUCTIONS
1. Start
Or
Turn on or off the heater by pressing the ON/OFF
button on the control panel or by pressing the
Power button on the supplied remote control.
Once power is off, heating elements will stop
working first. Fan will continue working for up
to 3 minutes to dispense residual heat inside the
heater. This is a normal function.
2. Start and select working mode
Or
Select a heat setting.
Press the MODE button to toggle between
the three heat settings.
High Mode uses 1500W; Low Mode uses
1000W. ECO mode is an Economic Energy
Saving Function. When ECO mode is
chosen, the heater will set the temperature
automatically to 68°F(20°C) under
this mode.
3. Setting control panel lock
For safety, users can lock the control panel so children can’t operate the heater. Locking can
be set in both power-on and power-off modes.
And
Press Temp Up and Temp Down buttons together
for 3 seconds. Locking is confirmed when a
buzzer rings. When locked, control panel and
remote control will not function.
