2.
Align U-Support (#7) on Table Top as shown in
Figure 1
.
1.
Lay Table Top #1 painted side down, on a smooth, flat
surface. Use the shipping container to protect the
painted surface of the table top.
1
7
Note:
Indentations are
small so look closely.
End Rail Mounting
Indentations
Note:
Indentations are
small so look closely.
ASSEMBLY TIP
Table top can be set on two saw horses.
Although this will make
assembly easier it is not necessary to complete assembly. Always use
shipping container to protect the painted surface of the table top.
CAUTION
: Make sure that the table top is secure on the
sawhorses and NEVER leave the table top unattended.
ASSEMBLY TIP
The following pages will have a picture of the
Hardware Needed
(to scale) along with the
Quantity, Key# and Description. You can lay the
hardware on the picture to identify the hardware.
Figure
3
