O W N E R ' S M A N U A L
2L-4239-00
2015 Escalade Sports
Escalade® Sports products may be manufactured and/or licensed under the following patents.
6120397, 5816957, 5769744, 5119741, 4911085, 4717157, D460140, D420563
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
TABLE TENNIS TABLE
MODEL NUMBER
T8840
Contact Escalade
®
Sports customer service department at:
Phone:
1-866-873-3528
Toll – Free !
Fax:
1-866-873-3533
Toll – Free !
E-mail:
Mailing Address (correspondence only):
Escalade Sports
PO Box 889
Evansville, IN 47706
Please visit our World Wide Web site at:
www.escaladesports.com
ON-LINE TROUBLE SHOOTING
TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS
FREQUENTLY ASKED QUESTIONS
ADDITIONAL ESCALADE
®
SPORTS PRODUCT INFORMATION
Please Do Not Return This Product To The Store!
1. Read this manual carefully before starting assembly.
Read each step completely before beginning each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before
assembling or ordering parts.
3. To make assembly easier, use the Hardware Identifier on page 2 to identify and sort all fasteners. Check all
cartons for kits. All hardware may not be located in one kit.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes may
not align and parts may not easily fit together. Leave locknuts slightly loose until you are instructed to
tighten them.
5. Tools required for assembly:
Phillips Screwdriver, one 3/8” Wrenches, Two 7/16” Wrenches (Ratchet and 3/8”, 7/16”
Sockets
are recommended
and can be substituted for wrenches), Rubber Mallet or Hammer.
6. An electric screwdriver is helpful in assembly.
However, please set at
low torque
and use caution because you could
over-tighten the and strip the screws out of the wooden table top.
7. Save these instructions and your proof of purchase (receipt) in the event that the manufacturer has to be
contacted for replacement parts.
