6
7. Press the
PRINCE CASTLE LOGO BUTTON
one
time and
LOGO=QUIT
will appear in the
FUNC-
TION DISPLAY
.
C) Probe A Programming
1. When
LOGO=QUIT
appears in the
FUNCTION
DISPLAY
press either the
SCAN UP
or
SCAN
DOWN BUTTON
until
PROG PROBE A
appears in
the
FUNCTION DISPLAY
.
2. Press the
ENTER BUTTON
twice and the
FUNC-
TION DISPLAY
will read
PrA-COOK TEMP
and the
TIME DISPLAY
will show your current cook tem-
perature.
3. Press either the
SCAN UP
or
SCAN DOWN BUT-
TON
to adjust the set point temperature.
Note:
The
set point temperature should be the same as the
temperature set on the fryer.
4. Press the
ENTER BUTTON
to store the new
temperature,
PrA-CAL (00)
will appear in the
FUNCTION DISPLAY
and the probe temperature in
the
TIME DISPLAY
.
5. Use a thermometer to measure the actual fryer
temperature.
6. Press either the
SCAN UP
or
SCAN DOWN BUT-
TON
to change the offset value so that the tempera-
ture in the
TIME DISPLAY
equals the actual fryer
temperature.
7. Press the
ENTER BUTTON
to store the changes.
8. Press the
PRINCE CASTLE LOGO BUTTON
to
return to the main programming menu. Press the
SCAN UP
or
SCAN DOWN BUTTON
until
Prog
Probe B
appears in the
FUNCTION DISPLAY
.
D) Probe B Programming
Follow the steps in
SECTION C
for programming
this probe.
9. Follow Steps 1-7 For Probe B
10. Press the
ENTER BUTTON
to store changes
ENTER LOGO=QUIT
will appear in the
FUNCTION
DISPLAY
.
11. Press the
PRINCE CASTLE LOGO BUTTON
twice
to return to the
RUN MODE
.
PrA-CAL (00)
320F
PROG PROBE A
- - - -
PrA-COOK TEMP
325F
PrA-COOK TEMP
320F
PrA-CAL (00)
325F
Printed in USA 3/06 © 2006
840-50
9
rev
A
