CTD & CTDE
Vertical Contact Toasters
6
301-500rev
E
-
EN
Setting Adjustments
1
Change Bun Compression adjustment.
Because the platen has separate segments for the
“Crown” (left) side and “Heel” (right) side, they are
adjusted separately, each with its own compression
control. For example, if the heels are slipping through
without making good contact with the platen and look
like they need more toasting, the right compression
adjustment switch may need to be moved to a different
letter. Or, if the crowns seem unusually thick and are
being compressed too much or over-toasted, the left
compression adjustment switch may need to be moved
to a different number.
A.
Turn the left-side compression adjustment closer
to “1” to allow for thicker crowns or closer to “10”
for thinner crowns.
B.
Turn the right-side compression adjustment closer
to “A” to allow for thicker heels or closer to “I” for
thinner heels.
2
Change the Recipe that is
running.
The unit has four recipes to
choose from. From the Run/Home
screen, you can change the
Recipe that is currently running.
A.
Press the Recipes icon on
the Run/Home screen. The
Recipes screen will appear.
B.
Press the Left arrow or Right
arrow to change the recipe.
C.
Press the check mark to
accept the change.
NOTE: If you don’t want to accept the change, you can
press the Return arrow.
3
Change the Temperature set
point.
From the Run/Home screen, you
can change the Temperature set
point.
A.
Press the thermometer icon
on the bottom of the
Run/Home screen. The Edit
Run Parameters screen will
appear with the current set
point.
B.
Press the Plus (+) symbol to
increase the set point or the
Minus (-) symbol to
decrease the set point.
C.
Press the check mark to accept the setting.
NOTE: If you don’t want to accept the change, you can
press the Return arrow.
4
Change the Time/Speed set
point.
From the Run/Home screen, you
can change the Time/Speed set
point.
Range: 6-40 seconds
Default: 17 seconds
A.
Press the center icon on the
bottom of the Run/Home
screen. The Edit Run
Parameters screen will
appear with the correct set
point.
B.
Press the Plus (+) symbol to
increase the set point or the
Minus (-) symbol to
decrease the set point.
C.
Press the check mark to accept the setting.
NOTE: If you don’t want to accept the change, you can
press the Return arrow.
17
Printed in USA
5/1/2022
Summary of Contents for CTD
Page 2: ...CTD CTDE Vertical Contact Toasters Printed in USA 5 1 2022 2 301 500revE EN ...
Page 19: ...CTD CTDE Vertical Contact Toasters 19 301 500revE EN Exploded Views Printed in USA 5 1 2022 ...
Page 23: ...23 301 500revE EN Wiring Diagram Printed in USA 5 1 2022 CTD CTDE Vertical Contact Toasters ...
