CTD & CTDE
Vertical Contact Toasters
10
301-500rev
E
-EN
Cool Down
WARNING
BURN/ELECTRICAL SHOCK HAZARD! Platen area is HOT
and can cause severe burns or severe shock. Keep hands
and objects out of the toaster unit! Failure to exercise
caution may result in serious injury! Follow this procedure
before touching or working on internal apparatus.
1
Press the Clean icon on the
Run/Home screen.
The Clean screen will appear. On
the Clean screen, you can view the
current platen temperature, the
thermometer icon, and the cool-
down temperature set point.
2
Wait while the toaster cools
down.
The thermometer icon will be
flashing until the current platen
temperature reaches the cleaning
set point temperature. The Cleaning
icon will then appear, indicating it is
okay to clean or work on the
toaster.
Daily Planned Maintenance
WARNING
BURN/ELECTRICAL SHOCK HAZARD! Platen area is HOT
and can cause severe burns or severe shock. Keep hands
and objects out of the toaster unit! Failure to exercise
caution may result in serious injury! Turn the unit off,
unplug it and follow the Cool Down procedure before
touching or working on internal apparatus.
WARNING
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified
person to avoid a hazard.
CAUTION
Do not immerse toaster in water. Do not clean with a water
hose or jet spray. Do not use abrasive cleaners, pads or
tools on the platen or the release sheet. Failure to exercise
caution will result in damage to the unit and will not be
covered by warranty. Cleaning and user maintenance shall
not be made by children without supervision.
1
Gather cleaning materials.
You will need clean cloths,
neoprene gloves, Foodservice Safe Multipurpose
Detergent Solution, sanitizer solution, and lukewarm
soap and water.
2
Follow the Cool Down procedure before cleaning.
3
Turn the toaster off and
unplug.
Turn the On/Off switch
located on the bottom right of the
unit to the ‘OFF’ position. The
green LED switch will also turn
off.
The plug removed from the outlet
shall remain clearly visible to the
operator during the maintenance
procedure. Do not pull on the
cord, grab the plug receptacle
instead.
4
Remove bun infeed and
release sheet.
Lay the release sheet on a flat
surface.
250
F
120
F
Printed in USA
5/1/2022
Summary of Contents for CTD
Page 2: ...CTD CTDE Vertical Contact Toasters Printed in USA 5 1 2022 2 301 500revE EN ...
Page 19: ...CTD CTDE Vertical Contact Toasters 19 301 500revE EN Exploded Views Printed in USA 5 1 2022 ...
Page 23: ...23 301 500revE EN Wiring Diagram Printed in USA 5 1 2022 CTD CTDE Vertical Contact Toasters ...
