Printed in USA 6/06 © 2006
4
197-538revC-EN
Cleaning
CAUTION: This is not jet-water approved, and
should not be cleaned with a water hose or jet
spray.
CAUTION: Do not immerse in water.
1.
Turn off the Power switch and unplug the toaster.
2.
Allow platen to cool for 60 minutes before cleaning.
3.
Remove the conveyor assembly.
4.
Wipe the conveyor with a damp cloth. For the chain use
a soft bristle brush.
5.
Remove the release sheet and lay it on a flat surface.
Thoroughly clean both sides with a damp cloth making
sure all carbon buildup is removed. Allow to air dry.
IMPORTANT: Rotate two sheets daily for longer life. Sheets
last 4 – 6 months based on care and volume of product
toasted.
6.
Use a damp cloth to remove any carbon buildup on the
platen surface.
IMPORTANT: Do not use sharp objects, Scotch Brite pads,
scouring pads, or abrasive cleaners on the platen or Teflon
release sheets as it will cause irreparable damage.
Preventive Maintenance (Motor)
To extend the life of your replacement motor, have an
authorized factory service technician or store manager wick
the shaft of the motor with 2-3 drops of oil every 3,000 hours
of run time.
IMPORTANT: Unplug toaster before performing any
preventive maintenance.
Figure 10
Shaft