4
IMPORTANT!
Carefully read these instructions before attaching
the appliance to the gas cartridge, and then refer to the instructions at a
regular basis to keep up to date on the appliance functions. Keep these
instructions for future reference.
1. Remove the burner and gas cartridge from the pot.
Fasten the burner to the gas cartridge.
2. Carefully screw the gas cartridge into the valve, until it touches the
O-ring of the valve.Make sure that no cross threading occurs when
you attach the gas cartridge.
3. Make sure that the seals of the appliance are correctly placed (1.1)
(see image) and in good condition before attaching the gas cartridge.
Never use an appliance with damaged or worn seals and never use a
leaking, damaged or malfunctioning appliance.
4. Changing or attaching the gas cartridge must be done outdoors.
Make sure there is no open flame nearby and that you are away from
other people. Shut the valve of the cartridge by turning the burner
valve (1.2) as far as possible clockwise. Make sure that the flame
on the stove has gone out, and that there is no other open flame or
source of ignition nearby.
5. If you have to check the gas soundness of the appliance, do this
outdoors. NEVER check for leaks with a naked flame. Use warm soapy
water only, applied to the joints and connections of the appliance.
Any leakage will show up as bubbles around the leakage area. If you
are in doubt or you can hear or smell gas, do not attempt to light the
appliance. Unscrew the cartridge and contact your local Primus dealer.
NEVER
cover the stove (gas cartridge) with wind shields, rocks or simi-
lar which may cause it to overheat and damage the stove and cartridge.
Overheating a gas cartridge by this means is highly dangerous.
1. Ignite the stove by turning the burner valve, while pressing the
ignition button repeatedly until the flame is lit and is burning
steadily. If necessary, repeat the ignition process when the burner
valve is fully closed.
2. Adjust the flame by turning the burner valve.
3. Only use the appliance in an upright position. Never move a lit
appliance. The flame may flicker before the appliance is warmed up,
or if it is moved suddenly.
4
TAKING OFF THE LID AND POURING
USE
GETTING STARTED
This appliance is only intended for use with the Primus Propane/Butane
mix cartridge 2206. It may be hazardous to attempt to fit other types
of gas cartridges.
Gas consumption: 64 g/h / 0.9 kW on butane at a pressure of 1 bar.
82 g/h / 3,050 Btu/h on butane at a pressure of 1.45 bar.
Jet nipple: 0.23 mm, 734790.
This gas appliance conforms to the provisions of EN521/ANSI Z21.72 / 11.2.
• Never leave the burner valve open if you have failed to ignite
the stove!
• Do not leave this appliance unattended while it is in operation.
• Make sure that the pot never boils dry.
ONLY FOR OUTDOOR USE!
• To avoid extreme danger, do
NOT
light the stove in a space with no
ventilation, such as indoors, in a tent, vehicle or other closed space.
• The distance to flammable material in roofs and walls must be at
least 500 mm, IF NOT, it may cause a fire.
• Handle the gas appliance with care. Do not drop it.
• NOTE! Only screw the gas cartridge onto the valve using manual
force. If it is screwed on too tightly, it may cause damage to the
cartridge.
SAFETY
1. Once the water is boiling, turn off the gas by turning the burner
valve clockwise. Lift off the lid and pour the water.
2. Be careful when handling the stove, parts of it will be hot after use!
Wait until the stove has cooled down before separating the burner
and the pot.
1
5
EN
