STEP 3
STEP 2
Assembly Instructions – Please follow these carefully
DC socket for PV Module
PV Module
Amber LED
IMPORTANT - Before fi rst use the Power Pack must be fully charged - charging time will be between 8 to 10 hours
of direct sunlight, the AMBER indicator fl ashing identifi es that the battery has reached full charge.
To activate battery pack, press on/off button.
STEP 1
Check that the Power Pack
switches are in the “ON”
position, locate the solar
panel in direct sunlight up
to 5m from the Power Pack
and connect to the DC input
on the side.
Flashing AMBER indicator
identifi es fully charged battery.
Charging
Position/hang the LED lights up to 7m from the power
pack, connect using the extension leads and turn on.
All lights can be controlled direct from the Power Pack
or individually operated via the inline switch to each light.
Assembly of system
A B C D/E
DC sockets for
LED lamp
DC sockets for 6V DC
mobile phone
Mobile phone
(not included)
Switch for A,B
On/Off Switch
Switch for C,D/E
Red LED
THE POWER PACK FEATURES TWO INDICATING LEDs
Amber LED: Illuminated (Solid) = Power Pack is charging
Amber LED: Flashing = Power Pack is fully charged
RED LED: Illuminated (Solid) = Power Pack voltage is low
and should be turned off
RED LED: OFF = Power Pack voltage has reached
12.4 +/-0.1 VDC
INDICATORS
MOBILE PHONE
CHARGING
– CHECK
PHONE MANUFACTURERS
CHARGING REQUIREMENTS
PRIOR TO CONNECTING TO
THE POWER PACK
Red LED
