504 775
PUBLICATION DATE 09/02
PROGRAMMING MANUAL
9
COIN
VALUE
Value of
switch (Units)
1
010
2
020
3
025
4
050
5
100
It is also possible to show a decimal point on the 3 digit LED display. There is foreseen a jumper on the
display to show the decimal point with 3 possible positions :
– If the jumper is placed in the middle, no decimal point is shown. (Ex. 999)
– Placing the jumper on the left or the right of the pin connector, there will be shown a decimal point next to
the second or third display. (Ex. 99.9 or 9.99)
COIN SELECTION: 0,5 EURO AND 1 EURO
The decimal is placed as follow : „4.00“, what means 100 units for 1 Euro.
The same logic shows „0,50“ Euro is 50 units and „1,00“ Euro is 100 units.
The coin switches has to be connected to coin value 4 (50 Units) and coin value 5 (100 Units).
COIN SELECTION : 0,20 EURO AND 0,50 EURO
The decimal point is placed as follow : „4.00“. So „0,20“ Euro is 20 units and „0,50“ Euro is 50 units.
Connect the coin switches to coin value 2 (20) and coin value 4 (50).
STEPPER (WASHING MACHINES)
Each switch of the PRICE SETTING (See fig. 5.1.)has a certain value, as mentioned in the following table:
Number
of switch
Value
number
1
1
2
2
3
4
4
8
5
16
6
32
7
64
8
128
A value is selected by switching the switch to the "ON" position.
The price is the product of the
PRICE SETTING(1-255)
and a
predetermined programmable value 5
!
The price lays between 5 and 1275 (1x5
÷
255x5).(1 and 255 are price settings, 5 is standard).
EXAMPLE
PRICE FOR ONE WASH: 4 EURO
We keep in mind that we have three digits on the display, and we will display the amount 4 Euro like “4.00”.
So we count for one unit on the display = “0.01” Euro.
For the decimal point we have to place the jumper on the display(software independent) next to third LED.
The price is determined by the DIP switch PRICE SETTING multiplied by a value 5.
We calculate the PRICE SETTING we have to set :
400 units (4 Euro) / 5 =
80